The RTM3 flowmeter with floating ball is used to adjust and measure the flow of a gas that is to be delivered to patients through the respiratory tract. The RTM3 should be connected to a source of pressured gas on the wall either using a direct probe or a rail mounting system. It must be […]
The flowmeters with pre-adjusted flowrates DEBFLO and DEBPLUS are used to set the flow of a gas that is to be delivered to patients through the respiratory tract. They should be connected to a source of pressured gas on the wall either using a direct probe or a rail mounting system. They must be fitted […]
The DEBSON 2 flowmeter with pre-adjusted flows is used to set the flow of a gas that is to be delivered to patients through the respiratory tract. It should be connected to a source of pressured gas on the wall either using a direct probe or a rail mounting system. It must be fitted at […]
The REGFLOW TM pressure regulator, connected to an Oxygen or medical AIR cylinder, is used to regulate the gas pressure by supplying the operating outlet with a controlled and stable pressure below its supply pressure. The pressure of the compressed gas cylinder can be read on the pressure gauge of the device. Combined with an […]
The REGSON TM2 pressure regulator, connected to an Oxygen or medical AIR cylinder, is used to regulate the gas pressure by supplying the operating outlet with a controlled and stable pressure below its supply pressure. The pressure of the compressed gas cylinder can be read on the pressure gauge of the device. Combined with a […]
The DETREG TM pressure regulator, connected to an Oxygen or medical AIR cylinder, is used to regulate the gas pressure by supplying the operating outlet with a controlled and stable pressure below its supply pressure. The pressure of the compressed gas cylinder can be read on the pressure gauge of the device. Only equipped with […]
The BLENDER TM2 is a medical device used to provide a mix of O2 and medical AIR to the patient (FiO2). It is intended to adjust the concentration of Oxygen (from 21 to 100%) in medical AIR. It is connected to sources of pressurised gas on the wall or to pressure regulators’ quick-release connectors using two […]
The ambulance panels fixed in emergency vehicles enable to supply several medical devices from a single gas source.
The humidifier is used to humidify the Oxygen or the medical AIR delivered to the patient through the respiratory tract. Screwed to the outlet of a flowmeter (either with floating ball or pre-calibrated), it should be filled in with sterile water only.
The Switch and the Flow-Switch can be screwed at the outlet of every flowmeters. They enable you to direct the gas flow either towards an outlet tubing nipple or a humidifier. The user can choose the requested position without removing the nipple or the humidifier.
The hosepipes are used as extensions and enable to supply devices with medical gases from standardized outlets. The probes are permanently crimped onto the hose.
The probes and the rail mounting systems enable to connect a medical device to a standardized wall outlet.
The blowing unit is used to dry surgical instruments after their cleaning and disinfecting processes. They should be connected to a medical AIR or a compressed AIR standardized outlet.
For any information concerning our Oxygen-therapy accessories, do not hesitate to contact us.
