Pressure regulators – REGFLOW TM

The REGFLOW TM pressure regulator, connected to an Oxygen or medical AIR cylinder, is used to regulate the gas pressure by supplying the operating outlet with a controlled and stable pressure below its supply pressure. The pressure of the compressed gas cylinder can be read on the pressure gauge of the device. Combined with an RTM3 flowmeter with floating ball, the REGFLOW TM pressure regulator enables to adjust and measure the flow of a gas that is to be delivered to patients through the respiratory tract from a gas cylinder. Fitted with a quick-release connector it also enables to supply a ventilator or any other medical device with gas.

  • Specifications
  • Available versions
  • Accessories
  • Downloads

2 connection systems to the gas cylinder:

  • Bullnose fitting: for large cylinders (> 4 litres in water or 0.8 m3).
  • Yoke pin-index fitting: universal system for small cylinders (< 4 litres in water or 0.8 m3).

Supply pressure: 200 bar

Outlet pressure: 4.5 bar

Piston type pressure regulator for a great reliability.

Single stage pressure regulator.

Integrated relief valve protected by the body of the pressure regulator thus ensuring its inviolability and its reliability.

Pressure gauge protected against shocks thanks to a plastic bumper.

Filter at the inlet to prevent the risks linked to high pressure.

Unit serial number engraved on the body of each pressure regulatorensuring its identification and traceability.

Device to be serviced every 5 years.

Gases: O2, Medical AIR

1.5 l/min (paediatric) – 5 l/min – 15 l/min – 30 l/min

  • With or without quick-release connector
  • With or without VENTURI TM2 ejector (OXAP)

Bullnose fitting:

  • O2: AFNOR (French standard), BS (British standard), DIN (German standard), US OHMEDA (American standard), UNI (Italian standard), NORDIC (Scandinavian standard). Contact us for other standard.
  • Medical AIR: AFNOR (French standard), DIN (German standard), NORDIC (Scandinavian standard).

Yoke pin-index fitting: universal system

Please get in touch to get more information