VENTURI TM2

The VENTURI TM2 ejector is used to create, to adjust and to measure a suction from a source of pressured gas on the wall or from a cylinder (oxygen or medical air). It enables to suck in liquids or mucus in the absence of vacuum pipeline network. The VENTURI TM2 ejector should be connected either to a source of pressured gas on the wall, using a direct probe or a rail mounting system, or a cylinder through a pressure regulator fitted with a quick-release connector. The VENTURI TM2 ejector should be associated with a collection jar and a suction hose.

Features

Class IIa medical device, compliant with EN ISO 10079-3
Supply pressure: 4 bar ± 1.0
Adjustable vacuum gauge –45° to +45°
Anodized aluminium body, strong and lightweight
High-performance silencer for quiet operation
100 ml safety jar polycarbonate, autoclavable 134 °C, unbreakable
Single-use antibacterial filter on front panel
Patented 3-in-1 system: jar + outlet nozzle + emergency suction
Laser-engraved serial number for full traceability
Dimensions: H 210 × W 95 × D 150 mm (with jar and AFNOR connector)
Weight: 570 g
Maximum vacuum: up to 800 mbar (–600 mmHg)
Suction flow rate: 40 l/min at 800 mbar
Limited gas consumption: 60 l/min at 800 mbar

Gases:

O2, medical Air.

Versions

Model with safety jar (100ml with plastic front filter, 150 ml or 500 ml with paper filter in the cover) or with outlet tubing nipple (tubing nipple integrated or outlet tubing nipple threads).

Consumables

Tube of 10 single-use antibacterial plastic filters: Ref. 11813
Box of 100 single-use antibacterial paper filters: Ref. 11818

Accessories

Safety jars

Downloads

Pictures pack

Catalogs & instructions

Standards

AFNOR (French standard), BS (British standard), DIN (German standard), US OHMEDA (American standard), UNI (Italian standard), NORDIC (Scandinavian standard), CARBUROS METALICOS (Spanish standard), DISS (American standard), Czech standard and Korean/Japanese standard. Contact us for other standard.