REGFLOW TM

The REGFLOW TM pressure regulator, designed for connection to an Oxygen or Medical Air cylinder, reduces the cylinder’s high pressure to deliver a regulated, stable, and safe outlet pressure.
Its integrated pressure gauge provides real-time monitoring of the remaining pressure in the compressed gas cylinder.
When combined with an RTM3 ball flowmeter, it allows accurate adjustment and measurement of the gas flow delivered to the patient via the respiratory route.
Equipped with a standard quick connector, the REGFLOW TM can also supply a ventilator or any other medical device directly.

Features

Two connection systems for the cylinder:
- Nut connection – for large cylinders (> 4 L water capacity or 0.8 m³)
- Yoke connection – universal system for small cylinders (< 4 L water capacity or 0.8 m³)
Inlet pressure: 200 bar
Outlet pressure: 4.5 bar
Regulator design:
- Piston regulator, highly reliable
- Single-stage regulation for stability and safety
- Integrated safety valve, tamper-proof and protected
Safety and durability:
- Pressure gauge protected with plastic shockproof cover
- Inlet filter preventing risks linked to high pressure
- Serial number engraved for identification and traceability
Maintenance: mandatory at least every 5 years

Gases

O₂, Medical AIR

Flowrates

1.5 l/min (paediatric) – 5 l/min – 15 l/min – 30 l/min

Versions

With or without quick-release connector
With or without VENTURI TM2 ejector (OXAP)

Accessories

Humidifiers

Downloads

Pictures pack

Catalogs & instructions

Standards

Bullnose fitting:

O₂: AFNOR (French standard), BS (British standard), DIN (German standard), US OHMEDA (American standard), UNI (Italian standard), NORDIC (Scandinavian standard). Contact us for other standard.
Medical AIR: AFNOR (French standard), DIN (German standard), NORDIC (Scandinavian standard).

Yoke pin-index fitting: universal system.